Panasonic KX-TDA600 Installation Manual page 244

2.11.4 Before Site Survey
KX-TDA0141/KX-TDA0142
CS no. 1 CS no. 2
1 1
2 2
3 3
4 4
Note
If more than 1 CS is in Radio Signal Test mode, each CS must have a unique CS number.
4.
After setting the DIP switches, connect the CS to an AC adaptor/battery box using a power supply adaptor.
WARNING
The AC adaptor should be connected to a vertically oriented or floor-mounted AC outlet. Do not
connect the AC adaptor to a ceiling-mounted AC outlet, as the weight of the adaptor may cause
it to become disconnected.
Notice
If the Power Supply Select switch is set to ON in step 3, connect the CS to an AC adaptor/battery box.
If it is set to OFF, connect the CS to a CSIF/DLC/DHLC card (KX-TDA0151/KX-TDA0152 only).
244 Installation Manual
DIP Switch
OFF
1
2
3
4
5
6
CS no. 3 CS no. 4 CS no. 5
1 1 1
2 2 2
3 3 3
4 4 4
ON
CS Number Switch
Keep this switch at the default
"OFF" position. Otherwise, the
CS will not function.
Radio Signal
Test Switch
CS no. 6 CS no. 7 CS no. 8
1 1 1
2 2 2
3 3 3
4 4 4
CS no. 9
1
2
3
4