Using Your Refrigerator; Setting The Controls; Changing The Control Settings; Power Saving Control - Whirlpool ET14AK Use & Care Manual

Using your refrigerator
REFRIGERATOR CONTROL
POWER SAVING CONTROL LIGHT SWITCH FREEZER CONTROL
Setting the controls...
Controls forthe refrigerator and freezer are in the
refrigerator. When the refrigerator is plugged in for
the first time...
PEFRIGLPATOR
.Y.DYCD . rnsnt;.
I. Set the REFRIGERA-
TOR CONTROL to 3.
2. Set the FREEZER
CONTROL to B. -
Give the refrigerator time to cool down com-
pletely before adding food. (This may take sev-
eral hours.]
These settings should be about right for nor-
mal household refrigerator usage.
The controls will be set about right when milk or
juice is as cold as you like and when ice cream is
firm.
Changing the control settings...
If you need to adjust temperatures in refrigerator
or freezer, use the settings listed in the chart below.
l
Adjust the Refrigerator Control first.
. Wait at least 24 hours between adjustments.
l
Then adjust the Freezer Control if needed.
CONDITION: REASON:
If Refrigerator
Section is
TOO WARM
Door opened often
Large amount of food added
Room temperature too warm
If Freezer
Section is
TOO WARM
QUESTIONS?
.call your
If Refrigerator
COOL-LINE ' Section is
service
TOO COLD
Door opened often
Large amount of food added
Very cold room temperature
(can't cycle often enough]
Controls not set correctly
for your conditions
assistance
telephone
If ICE isn't
number
MADE FAST ENOUGH
(page 151.
If BOTH SECTIONS
are TOO WARM
RECOMMENDED
CONTROL SETTINGS:
Refrigerator 4
Freezer C
Refrigerator
Freezer
Refrigerator
Freezer
Heavy ice usage
Very cold room temperature
(can't cycle often enough]
Door opened often
Large amount of food added
Very warm or very cold
room temoeratures
Refrigerator
Freezer
Refrigerator
Freezer
Power Saving Control...
1. Use the "CONSUMES LESS ENERGY" setting when
The Power Saving Control on the Control Con-
humidity is low.
sole operates electric heaters around the door
2. Use the "REDUCES EXTERIOR MOISTURE" setting if
openings. These heaters help keep moisture from
moisture forms on the outside of the refrigerator.
forming on the outside of the refrigerator.
A red dot is visible when the switch is in the "RE-
P,+.!T i""LP
DUCES EXTERIOR MOISTURE" position.
.I oN~,~u:~ ii LlltP<,T . 'LDUCLI Llrtlios YOISTUIE.
5