Using The Projector; Connecting To An Antenna Or Cable - LG PF85U Owner's Manual

28

USING THE PROJECTOR

USING THE
PROJECTOR
Connecting to an
Antenna or Cable
To watch TV using an indoor/outdoor
antenna, connect a wall terminal and the
antenna port of the Projector using an
RF cable (75 Ω).
You can watch terrestrial or cable
(analog, digital) TV.
(The RF cable is sold separately.)
NOTE
Make sure not to bend the copper
y y
wire of the RF cable (75 Ω). Turn
the input jack to the right to fasten it.
Copper wire
Ensure you use a standard coaxial
y y
cable (75 Ω, sold separately) when
connecting to the projector input.
For better image quality in
y y
locations where signal strength is
low, purchase and install a signal
amplifier (booster).
A signal splitter is required if you
y y
want to use two or more projectors
through one antenna.
If you have any problems when
y y
installing the antenna, please
consult a suitable retailer or the
store where you purchased the
antenna.