Information Codes - Samsung 1404262L User Manual

tzozAb ,shoot ncj
INFORMATION CODES
The Control Panel displays information codes to help you understand what is occurring with your
dishwasher. If you see any of the codes listed below, you should select the Reset option, and then follow
the instructions in the Solution column.
tE Temperature Sensor error
HE1 Heater error
HE High temperature heating error
tE Low water level error
PE Half load function error
7E Reflector function error
4E
Functional error. With the dishwasher empty, add
detergent, and then run a cycle.
If the problem continues, go to your house
circuit breaker panel, set the dishwasher's
circuit breaker switch to off, and then contact an
authorized Samsung service center.
Check if flatware or dishware interferes with
the water reflector and the water reflector does
not operate as a result.
If this happens without any interference, close
the water supply valve and contact an authorized
Samsung service center.
Check whether the water supply valve is closed,
the water supply is suspended, or the water
inlet valve or line is frozen or clogged by foreign
Water supply error
4E5
5E
Drain error
OE Over-level water error
LE
Leakage
Button error
bE2
3E
AE
Communication Error
bE3
AE6
particles.
If the problem continues, close the water supply
valve, and then contact an authorized Samsung
service center.
Check whether the drain hose is clogged or
folded. If the problem continues, close the water
supply valve, and then contact an authorized
Samsung service center.
Functional error. Close the water supply valve
and go to your house circuit breaker panel, set
the dishwasher's circuit breaker switch to off,
and then contact an authorized Samsung service
center.
Functional error. Turn off the dishwasher and try
to start it again.
If the problem continues, contact an authorized
Samsung service center.
For any codes not listed above, call 1-800-SAMSUNG (726-7864)
English o 28