Storing Your Dishwasher - Samsung 1404262L User Manual

Top nozzle
1. Check whether the nozzle holes are clogged
by food particles.
2. If cleaning is needed, remove the nozzle.
3. To remove the nozzle, pull out the upper
rack first, unfasten the nozzle cap by turning
it counterclockwise, and then remove the
upper nozzle.
4. Clean the nozzle, re-insert it, and then fasten
the nozzle cap to the nozzle by turning the
cap clockwise.
5. Check whether the nozzle is engaged
correctly by rotating it by hand.
i ¸ _
I j ' _ =L. !
r
1 -
DJ J J
p Cap
.s<r: nozzle
CLEANING THE FILTER
1. Remove the lower rack first.
2. Rotate the filter handle counterclockwise to unfasten the filter
compartment door.
3. Remove the filter door, and then the
flat micro filter underneath.
4°
Remove any dirt or other remains
from the micro filter and the filter door,
and then rinse them under running
water.
Filter with handle Flat micro filter
5. Re-install the flat micro filter, and then the filter door.
6. Rotate the filter door handle clockwise to lock the filter door.
[_ Once
month, clean the filter for better washing performance. a
If the filter door does not close properly, cleaning performance will be decreased.
CAUTION
STORING YOUR DISHWASHER
If you need to store your dishwasher for an extended period of time, first drain and disconnect it. If you
leave water in the hoses and internal components, you can damage the dishwasher.
After draining and disconnecting the dishwasher, be sure to turn off the water supply valve and circuit
breaker.
English o 23