Safety Instructions; Operation - Ryobi BCL14181H Owner's Operating Manual

SAFETY INSTRUCTIONS

The product is not intended for use by persons
(including children) with reduced physical, sensory
or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or
instruction concerning use of the product by a person
responsible for their safety.
Children should be supervised to ensure that they do
not play with the product.
Please read and observe these instructions before using
the device.
Before using the device check that the mains cable
■
and mains plug are not damaged.
The device must not be damp, neither should it be
■
used in a damp environment.
Do not use the device if it has suffered any heavy
■
shock or jolting, or is damaged in any other way.
Due to the heat generated during charging,
■
the battery charger should not be operated on a
combustible surface/in an inflammable environment.
Do not cover the ventilating slits.
■
Never disassemble the device yourself.
■
Pull the plug of the battery charger out of the socket
■
when it is not in use or when cleaning it.
Only use extension cable that is approved and
■
technically in perfect condition.
WARNING
English
During operation provide sufficient ventilation.
■
Malfunction during charging can be caused by storing
and operating in places where the temperature
exceeds +40°C; this should be avoided. Battery
charging in closed cupboards, near heat sources
(radiators, bright sunshine) etc., causes heat to
accumulate and can damage the device.
If the battery is not going to be used for a longer
■
period, pull the battery off the battery charger and pull
out the mains plug.
Protect battery contact to avoid a short circuit caused
■
by metallic object that can cause a fire or explosion!
Only charge original recommended batteries.
■
If the power cord is damaged, it must be replaced by an
■
Authorised Service Center in order to avoid a hazard.
WARNING
D o n o t r e c h a r g e p r i m a r y c e l l s ( n o n -
rechargeable).
Damage to property
Mains voltage must correspond with the voltage
specifications on the device.

OPERATION

APPLICATIONS
You may use this product for the following purposes:
Charging compatible Ryobi 14.4 Volt and 18 Volt
■
battery packs.
1