Your System Does Not Start Properly - HP ZX2000 Getting Started Manual

Troubleshooting

your system does not start properly

The system doesn't power on.
Make sure...
The system power cord is properly connected. Connect the power cord to a working power
There is a buzzing noise.
A beep code when the system starts up means that there is a configuration problem. Many of the
e-buzzer codes relate to the LED diagnostic codes. See section "Using the LEDs and e-buzzer to
Troubleshoot Your System".
Make sure...
You correctly identify the e-buzzer error code. Count the number of beeps after the buzzer (refer
If you still have a problem, see "Software Diagnostics Tools" on page 2-11.
2–2
How
outlet and to the rear of the system.
How
to the section "Troubleshooting with the e-buzzer"
on page 2-9).
Contact HP Support (refer to page 2-16).
Getting Started Guide