Brother HL-2030 User Manual page 18

3
Lift up the support flap to prevent paper from sliding off
the face-down output tray.
Note
If you choose not to lift up the output tray support flap, we
recommend that you remove printed pages as soon as they
come out of the printer.
4
Using both hands, slide the manual feed slot paper
guides to the width of the paper that you are going to use.
5
Using both hands, put one piece of paper or one
envelope in the manual feed slot until the front edge of
the paper or envelope touches the paper feed roller.
When you feel the machine pull in the paper, let go.
Note
• Put the paper into the manual feed slot with the side to be printed face up.
• Make sure that the paper or transparency is straight and in the proper position on the manual feed slot.
If it is not, the paper or the transparency may not be fed properly, resulting in a skewed printout or a
paper jam.
• Do not put more than one piece of paper in the manual feed slot at any one time, as it may cause a jam.
• If you put any Media (paper, transparency and so on) in the manual feed slot before the printer is in
the Ready state, the media may be ejected without being printed on.
About this printer
1
1 - 11