Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for AEG FAVORIT 78400 VI0P
Summary of Contents for AEG FAVORIT 78400 VI0P
- Page 1 EN User manual FAVORIT 78400 VI0P...
-
Page 2: Table Of Contents
11. TECHNICAL INFORMATION ..........16 FOR PERFECT RESULTS Thank you for choosing this AEG product. We have created it to give you impeccable performance for many years, with innovative technologies that help make life simpler –... -
Page 3: Safety Instructions
ENGLISH SAFETY INSTRUCTIONS Before the installation and use of the ap- • Make sure that the electrical informa- pliance, carefully read the supplied in- tion on the rating plate agrees with structions. The manufacturer is not re- the power supply. If not, contact an sponsible if an incorrect installation and electrician. - Page 4 • Do not keep the appliance door open without supervision to prevent to fall on it. • Do not sit or stand on the open door. • Dishwasher detergents are dangerous.
-
Page 5: Product Description
ENGLISH 2. PRODUCT DESCRIPTION Upper spray arm Upper basket Lower spray arm 2.1 Light beam Filters Rating plate • When a programme operates, a red light beam shows on the floor below Salt container the appliance door. When the pro- Air vent gramme is completed, the red light Rinse aid dispenser... -
Page 6: Programmes
Indicators Description Salt indicator. This indicator is off while the programme oper- ates. Rinse aid indicator. This indicator is off while the programme operates. End indicator. 4. PROGRAMMES Programme Degree of soil Programme phases Options Type of load Prewash ÖKO PLUS... - Page 7 ENGLISH 2) This programme has a high temperature rinsing phase for better hygiene results. During the rinsing phase, the temperature stays at 70 °C for at least 10 minutes. 3) This is the most silent washing programme. The pump works at a very low speed to decrease the level of noise.
-
Page 8: Options
5. OPTIONS 5.1 Multitab option 5.3 Acoustic signals Activate this option only when you use The acoustic signals operate in these the combi detergent tablets. conditions: This option deactivates the flow of rinse • When the programme is completed. -
Page 9: Adjusting The Water Softener
ENGLISH 3. Fill the rinse aid dispenser. move them. Do not use detergent and do not load the baskets. 4. Open the water tap. 5. Processing residues can stay in the appliance. Start a programme to re- 6.1 Adjusting the water softener Water softener Water hardness adjustment... -
Page 10: Daily Use
10 www.aeg.com 6.2 Filling the salt container Turn the cap counterclockwise and open the salt container. Put 1 litre of water in the salt con- tainer (only for the first time). Fill the salt container with dishwash- er salt. Remove the salt around the opening of the salt container. -
Page 11: Setting Mode
ENGLISH 5. Set and start the correct programme for the type of load and the degree of soil. 7.1 Using the detergent Press the release button (B) to open the lid (C). Put the detergent in the compart- ment (A) . If the programme has a prewash phase, put a small quantity of deter- gent on the inner part of the appli-... -
Page 12: Hints And Tips
12 www.aeg.com 1. Press RESET until the display shows 2 2. Close the water tap. horizontal status bars. If you do not press the on/off button, the AUTO OFF device Cancelling the programme automatically deactivates the ap- pliance after some minutes. This 1. -
Page 13: Care And Cleaning
ENGLISH • Make sure that cutlery and dishes do • The filters are clean and correctly in- not bond together. Mix spoons with stalled. other cutlery. • The spray arms are not clogged. • Make sure that glasses do not touch •... -
Page 14: Troubleshooting
14 www.aeg.com Make sure that the filter (B) is cor- rectly positioned under the 2 guides (C). Assemble the filter (A) and put it back in filter (B). Turn it clockwise until it locks. An incorrect position of the filters can cause bad washing results and damage to the appliance. - Page 15 ENGLISH Problem Possible solution Make sure that the pressure of the water supply is not too low. For this information, contact your local water authority. Make sure that the water tap is not clogged. Make sure that the filter in the inlet hose is not clogged.
-
Page 16: Technical Information
16 www.aeg.com 7. Fill the rinse aid dispenser. 11. TECHNICAL INFORMATION Dimensions Width / Height / Depth 446 / 818 - 898 / 550 (mm) Electrical connection Refer to the rating plate. Voltage 220-240 V Frequency 50 Hz Water supply pressure Min. - Page 17 ENGLISH...
- Page 18 18 www.aeg.com...
- Page 19 ENGLISH...
- Page 20 www.aeg.com/shop...