Wall Mounting; Storage Recommendations; Register Online - DeWalt DCB114 Instruction Manual

40v max* lithium ion charger
Table of Contents

Advertisement

Available languages

Available languages

charging procedure. You may also charge a partially used pack
whenever you desire with no adverse affect on the battery pack.
5. Foreign materials of a conductive nature such as, but not limited
to, grinding dust, metal chips, steel wool, aluminum foil, or any
buildup of metallic particles should be kept away from charger
cavities. Always unplug the charger from the power supply
when there is no battery pack in the cavity. Unplug charger
before attempting to clean.
6. Do not freeze or immerse charger in water or any other liquid.
WARNING: Shock hazard. Don't allow any liquid to get inside
charger. Electric shock may result.
CAUTION: Burn hazard. Do not submerge the battery pack in any
liquid or allow any liquid to enter the battery pack. Never attempt to
open the battery pack for any reason. If the plastic housing of the
battery pack breaks or cracks, return to a service center for recycling.

Storage recommendations

1. The best storage place is one that is cool and dry away from
direct sunlight and excess heat or cold.
2. For long storage, it is recommended to store a fully charged battery
pack in a cool dry place out of the charger for optimal results.
note: Battery packs should not be stored completely depleted of
charge. The battery pack will need to be recharged before use.
SAve THeSe inSTrucTionS
for fuTure uSe
Wall mounting (fig. 3 and 4)
1. Find a wall stud where you desire the charger to hang. Mark its
location.
2. With the arrow (A) on the bracket (B) facing up, place the bracket
at the desired location. Ensure the center of the bracket is against
the wall so the wings (C) of the bracket stand out from the wall.
Use a level to ensure the bracket is
level and mark the location of the
bracket holes (D) on the wall as
shown in Figure 3.
3. Drill a hole at the locations of the
marks.
4. Securely fasten the bracket to the
wall using appropriate hardware.
5. Slide the charger over the bracket
so it catches the slots in the back
of the charger as shown in Figure 4.
Ensure the charger is held securely.
repairs
The charger and battery pack are not
serviceable. There are no serviceable
parts inside the charger or battery pack.
reaD aLL oF the InstruCtIons
In
the
Battery
CharGer
seCtIon oF thIs ManuaL BeFore
atteMptInG to CharGe the
Battery paCk For your tooL.
To assure product SAFETY and
RELIABILITY, repairs, maintenance and adjustment should be
performed by certified service centers or other qualified service
organizations, always using identical replacement parts.

register online

Thank you for your purchase. Register your product now for:
• Warranty serVICe: Registering your product will help you
obtain more efficient warranty service in case there is a problem
with your product.
6
FIG. 3
C
A
D
B
FIG. 4

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents