Power Backup Operation - Panasonic KX-TGF340 Operating Instructions Manual

Making an intercom call
Handset
1
MMENUN a MbN: "Intercom" a
MSELECTN
2
MbN: Select the desired unit. a MSELECTN
3
When you finish talking, press MOFFN.
Note:
R You can also use the MINTERCOMN soft
key, if displayed, to make intercom calls.
Base unit
1
Press MINTERCOMN.
When 2 or more handsets are
registered:
– To page a specific handset, enter the
handset number.
– To page all handsets, press 0 or wait
for a few seconds.
2
When you finish talking, press MZN.
Answering an intercom call
Handset
1
Press M N to answer the page.
2
When you finish talking, press MOFFN.
Base unit
1
Press MZN to answer the page.
2
When you finish talking, press MZN.
Turning auto intercom on/off
This feature allows the handset or base unit to
answer intercom calls automatically when it is
called. You do not need to press M
MZN. When this feature is set to "On", the
monitoring handset or base unit for the baby
monitor feature (page 36) will also answer
baby monitor calls automatically. The default
setting is "Off".
Handset / Base unit
1
MMENUN#273
For assistance, please visit www.panasonic.com/support
TGF34x_en_1201_ver043.pdf
N or
19
Making/Answering Calls
2
MbN: Select the desired setting. a
MSAVEN
3
Proceed with the operation for your unit.
Handset: MOFFN
Base unit: MEXITN

Power backup operation

When a power failure occurs, the charged
handset temporarily supplies power to the
base unit (power backup mode). This allows
you to make and receive calls using a handset
during a power failure. The base unit will not
perform any other functions. However, some
functions such as Caller ID and phonebook
are available only when using a handset other
than the handset supplying power to the base
unit. You can program "Power failure"
and the default setting is "Auto" (page 32).
Important:
R If a handset is not placed on the base unit
when a power failure occurs, "Base no
power Press OFF" is displayed. After
pressing MOFFN on the handset, place it on
the base unit to start power backup mode.
R Power backup mode will not work if the
battery level of the power supplying
handset is or .
R Do not lift the power supplying handset
from the base unit during power backup
mode.
Panasonic Ni-MH battery
performance (supplied batteries)
during power backup mode
When the batteries are fully charged,
operating time of the handset in power backup
mode varies depending on usage.
– Continuous use of the handset in power
backup mode: 1.5 hours max.
– Continuous use of the handset other than a
handset in power backup mode: 2 hours
max.
– Not in use in power backup mode: 2 hours
max.
19
2014/12/01 16:22:17