Nokia E5-00 User Manual page 154

154 Settings
Proxy server address — Enter the
address of the proxy server.
Proxy port number — Enter the port
number of the proxy server.
WLAN internet access points
Select Menu Ctrl. panel
>
and Connection
Access point, and follow the
instructions on the display. Or, open one
of the access point groups, select an
access point marked with
Options > Edit.
Use the instructions provided by your
service provider to edit the following:
Connection name — Define a name for
the connection.
Data bearer — You might not be able
to edit the data bearer once defined.
Define a new access point if needed.
WLAN network name — Select
manually or Search for
you select an existing network,
network mode
mode are determined by the settings of
its access point device.
Network status — Define whether the
network name is displayed.
Settings
>
Destinations
>
, and select
networks. If
WLAN
and WLAN security
WLAN network mode — Select
hoc to create an ad hoc network, and to
allow devices to send and receive data
directly; a WLAN access point device is
not needed. In an ad hoc network, all
devices must use the same WLAN
network name.
WLAN security mode — Select the
>
encryption used: WEP, 802.1x, or
WPA2. (802.1x and WPA/WPA2 are not
available for ad hoc networks.) If you
select Open
used. The WEP, 802.1x, and WPA
functions can be used only if the
network supports them.
Use access point — Select
confirmation
for confirmation before the connection
using this access point is created or
Automatically
connect to the destination using this
access point automatically.
Enter
To enter the settings for the selected
security mode, select
settings.
Advanced WLAN settings
Select Options
and from the following:
network, no encryption is
to set the device to ask
to set the device to
WLAN security
Advanced settings
>
© 2010 Nokia. All rights reserved.
Ad-
WPA/
After