This manual covers many models and not all cycles, options, or features listed are available on every model. Console shown above for reference
only. Your model may differ.
Press the Power button to turn on the unit. Press the icon
for the cycle desired and the indicator for that cycle will be
To change the cycle once the cycle has begun, press the Power
button to cancel the current cycle, press the Power button to turn
on unit again, select a new cycle, and press Start again. Just
pressing another cycle icon will not change the cycle.
For best results
Follow the fabric care label instructions
on items to be washed.
Use this load for cotton, linen, towels, shirts, sheets, denims
and mixed loads.
deep clean sanitize
Use the deep clean sanitize cycle to clean and sanitize
heavily soiled, colorfast fabrics including towels, bedding,
and children's clothing.
It is recommended that you set your water heater to 120° F
(49° C) or higher to ensure proper performance during this
cycle. If the setting is lower or the load is extra large, the
cycle time will be extended by 30 minutes or more.
The sanitize cycle will kill 99.9% of bacteria with no
carryover of bacteria between loads. No bleach or harsh
chemicals are needed, but higher temperatures are required.
Please check fabric care labels to prevent damage.
Only sanitizing cycles have been designed to meet the
requirements of NSF P172 protocol for sanitization efficacy.
Sanitization Performance of Residential
and Commercial, Family-Sized Clothes
My Favorites Button
Cycle Options / Cycle Status Display
NSF Protocol P172
The wash water is heated by an internal boost heater as
the load tumbles. Cold water is added to cool down the load
prior to drain and spin.
If the voltage at your outlet is under 110 v, the internal
heater may not adequately heat the wash water. If
the cycle is interrupted while the water is heating, the
final temperature of the wash water may be lower and
sanitization may be reduced.
Use this cycle for heavily soiled, durable garments - ex.
towels, sports gear, or fabric tote bags. For best soil and
stain removal, use the hottest water safe for the fabrics
Use this cycle for cottons and blends with a permanent press
or no-iron finish.
Use this cycle for lightly soiled knits and delicates which
require gentle washing.
rinse & spin
Select rinse & spin for loads that need a cold water rinse or
to add fabric softener that may have been omitted in a regular
cycle. Add the fabric softener to the dispenser chamber. Select
the spin speed appropriate for the load.
You may deselect fresh rinse if you wish to perform a spin
only cycle or select no spin if you want to perform a drain
Soil Level Button