Canon PowerShot A10 User Manual page 112

Image too large
Incompatible
JPEG format
Corrupted data
RAW
Unidentified image You attempted to replay an image file recorded in a unrecognized format (file
Cannot magnify!
Cannot rotate!
Protected!
Too many marks!
E xx
110
You attempted to replay an image whose file size was too large or whose
resolution exceeded 3200 × 2400 pixels.
You attempted to replay an incompatible JPEG file.
You attempted to replay an image with corrupted data.
You attempted to replay a RAW image.
recorded by a different camera in a proprietary format, etc.).
The image you attempted to magnify was recorded by another camera, or
recorded in a format that cannot be magnified, or edited on a computer.
The image you attempted to rotate was recorded by another camera, or
recorded in a format that cannot be rotated, or edited on a computer.
You attempted to erase a protected image.
Too many images have been marked for printing. Cannot process any more.
Camera malfunction (where xx is the two-digit error code). Try turning the
camera off and back on. If this message recurs frequently, note down the error
and call a Canon Customer Support Help Desk. If this message appears
immediately after you have taken a shot, it is possible that the camera failed to
record the image—so you may want to switch into Replay mode to check
whether the image was actually recorded.