Ir Sensor; Batteries; Cleaning - Philips 32PFH4100 User Manual

5.2

IR sensor

The TV can receive commands from a remote control that uses
IR (infrared) to send commands. If you use such a remote
control, always make sure you point the remote control at the
infrared sensor on the front of the TV.
5.3

Batteries

1. Slide the battery door in the direction shown by the arrow.
2. Replace the old batteries with 2
type AAA-LR03-1.5V batteries. Make sure the + and the - ends
of the batteries line up correctly.
3. Reposition the battery door.
4. Slide it back until it clicks.
Remove the batteries if you are not using the remote control for
a long time.
Safely dispose of your old batteries according to the end of use
directions.
5.4

Cleaning

Your remote control is treated with a scratch-resistant coating.
To clean the remote control, use a soft damp cloth. Never use
substances such as alcohol, chemicals or household cleaners on
the remote control.
15