Download  Print this page

Changing The Pronto Settings - Philips TSU9300 Starter Manual

Using the control panel
Hide thumbs


TSU9300 Starter's Guide
Turning the Control Panel On/Off
Always switch off the Control Panel during transport to avoid activation of the touchscreen and the
battery draining.

Changing the Pronto Settings

Your installer might have blocked access to the Settings pages.
Normally, your installer has fully programmed your Control Panel and no changes are required.
To open the Settings pages:
Press and hold the Settings icon
Press and hold the "–" and "+" buttons to decrease or increase the settings more quickly.
Power switch
The power switch on the
left side of the Control
Panel turns the Control
Panel on and off.
for more than 3 seconds.
To access the other Settings pages:
• Tap the Page +/Page - key.
On the Info Page you can find the version
and network information and memory status.
To change Date & Time settings
1 Tap the Month, Day, Year, or Time button.
The button is highlighted.
2 Tap the "-" and "+" buttons to adjust the
date or time.
To change the Volume settings
• Tap the "-" and "+" buttons to adjust the
volume settings.
The General volume refers to all beeps you
hear when you operate the Control Panel.
The Button volume specifically refers to the
default beep you hear when you press a

Hide quick links:


Table of Contents

  Related Manuals for Philips TSU9300

This manual is also suitable for:

Pronto tsu9300