Display Section - Sony DWR-S01D Operating Instructions Manual

i MENU SELECT (menu selection)
button
Selects the displayed menu.
j SET button
Changes the item to be set or enters the
selected function or parameter value.
k + or – button
Use to select a function or value.
If you set the POWER switch on tuner 1 or
tuner 2 to ON while holding down the +
button, the tuner that you turned ON will
begin the scanning operation of the clear
channel scan function.
If you set the POWER switch on tuner 1 or
tuner 2 to ON while holding down the –
button, the tuner that you turned ON will
begin the pairing operation of the wireless
remote control function.
l Display section
Meter display
A Audio input level meter
Indicates the input signal level.
B Reference level gage
Indicates the reference input level.
58 dBu ( 60 dBV) is indicated when the
– –
input level is set to "MIC" on the
transmitter, and +4 dBu when the input
level is set to line.
C Peak indicator
Warns of excessive input by lighting up
when the signal is 3 dB below the level at
which distortion begins.
D Battery indication
Based on metadata from the transmitter,
shows the transmitter's battery condition
according to 8 level indications.
Replace both batteries when the battery
indication starts to flash.
For details on how to change the batteries on the
transmitter, refer to the operating instructions
supplied with the transmitter.
E Signal quality level meter
Indicates the quality of the RF signal
reception.
The occurrence of many data errors during
a given interval reduces the height of the bar
graph.
This meter allows you to monitor signal
deterioration that may occur when there is
noise or when the transmitter is too far from
the receiver.
F RF level meter
Indicates the RF input level. The number of
segments that light up depends on the input
level.
When the squelch function is set, the
squelch level is indicated on the RF level
meter.
When the RF input level drops below the
squelch level, the output signal is muted.
Parts Identification 11