Frame Separation - Pride Celebrity DX Sport Owner's Manual

Hide thumbs Also See for Celebrity DX Sport:
Table of Contents

Advertisement

V I I I .
D I S A S S E M B L Y
6. Unplug both battery harnesses. Pull each harness
straight up. See figure 22.
7. Unfasten the battery tie-down strap and remove the
batteries from the battery wells.
WARNING! Failure to unplug both
battery harnesses, the front-to-rear
harness, and rear lighting harness
prior to separating the front and rear
sections could result in permanent
damage to the scooter.

Frame Separation

1. Squeeze the tiller adjustment lever and lower the tiller
to its lowest point.
2. Lift up on the frame release lever. See figure 23.
3. Lift the front section up until the frame hooks of
the front section separate from the rear section.
See figure 24.
NOTE: Stabilise the rear section with your free hand
by holding onto the upper frame tube. See figure 26.
4. Slowly separate the two sections. See figure 24.
34
A N D
REAR LIGHTING
HARNESS
BATTERY HARNESSES
Figure 22. Harness Connections
Figure 23. Frame Release
Figure 24. Frame Separation
www.pridemobility.com
A S S E M B L Y
FRONT-TO REAR HARNESS
FRAME RELEASE LEVER
FRAME LOCK
LOWER FRAME TUBE
UPPER FRAME TUBE
FRAME HOOK
Celebrity DX Sport
FRAME HOOK

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents