Maintenance; Cleaning The Ups; Maintaining Batteries; Battery Replacement - Liebert PSITM User Manual

1000 - 3000va 230v power availability
Table of Contents

Advertisement

10.0 M
AINTENANCE
The PowerSure PSI UPS requires very little maintenance. Follow these practices to prevent prob-
lems.
10.1

Cleaning the UPS

The following will help ensure trouble-free operation for years:
• Vacuum dust from the ventilation intake occasionally.
• Wipe the cover periodically with a dry cloth.
10.2

Maintaining Batteries

The batteries are valve-regulated, nonspillable, lead acid and must be kept charged to retain their
design life. The UPS continuously charges the batteries when connected to the mains supply, even
while the UPS is switched Off.
When storing the UPS, it is recommended to plug in the UPS for at least 24 hours every four to six
months to ensure full recharge of the batteries.
The PowerSure PSI is designed to allow the user to replace the internal batteries safely. Read the
safety cautions before proceeding. Contact your local dealer or Liebert representative to obtain the
appropriate replacement battery kit part number and pricing.
10.3

Battery Replacement

CAUTION
!
A battery can present a risk of electrical shock and high short circuit current. The following
precautions should be observed before replacing the batteries:
• Remove rings, watches, and other metal objects.
• Use a Phillips (crosshead) screwdriver with insulated grips.
• Do not lay tools or other metal objects on top of the batteries.
• If the battery replacement kit is damaged in any way or shows signs of leakage, contact
your local dealer or Liebert representative immediately.
• Do not dispose of batteries in a fire. The batteries may explode.
• Dispose of old batteries according to local codes.
• Risk of explosion if battery is replaced by an incorrect type. Refer to 12.0 - Specifications
for battery information.
• Do not open or mutilate the batteries. Released electrolyte is harmful to skin and eyes. It is
toxic.
NOTE
This UPS is equipped with internal "hot swappable" batteries that the user can replace without
shutting down the UPS or connected loads. Caution should be exercised when replacing the
batteries because the load is unprotected from disturbances and power outages during this
procedure.
22

Maintenance

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents