Dell S510 User Manual page 121

Image Control
• Projector Mode: Allows you to select the projector mode, depending
on how the projector is mounted. There are two projection modes:
Front Projection-Wall Mount and Rear Projection-Wall Mount.
• Source Select: The Source Select menu allows you to select your
projector's input source. You can select VGA-A, VGA-B, Composite
Video, HDMI-A, HDMI-B, Wireless Display, USB Display, USB Viewer,
®
Intel WiDi, or Internal Memory.
• Video Mode: Select a mode to optimize the display image based on
how the projector is being used:
- Presentation: Best for presentation slides.
- Bright: Maximum brightness and contrast.
- Movie: For viewing movies and photos.
- sRGB: Provides a more accurate color representation.
- Custom: User-preferred settings.
• Blank Screen: You can select On or Off.
• Aspect Ratio: Allows you to select the aspect ratio to adjust how the
image appears.
• Brightness: Select value to adjust the brightness of the image.
• Contrast: Select value to adjust the display contrast.
Click the Auto Adjust button to adjust the settings automatically.
Audio Control
Volume: Select the value (0~20) for audio volume.
•
Click the Factory Reset button to restore the factory default settings.
Using Your Projector 121