Quick Cook Settings - Westinghouse WM009 User Manual

SET UP & USE
DEFROST BY WEIGHT
1. Touch DEFROST BY WEIGHT pad.
2. Enter weight.
3. Touch START/+30 SEC. pad.
NOTE: · Weight must be in pounds and
ounces. Ounce weights less than 10
must be preceded by a 0. If label
gives weight in pounds only, change
the fraction of a pound to ounces
using the chart on page 13.
· You may need to turn food over
at the middle of cooking time to
obtain uniform cooking.
SETTING CHILD LOCK
The child lock prevents unsupervised
operation by children.
To set: In standby mode, press and
hold RESET for 3 seconds. Lock
indication appears on the display.
To cancel: Press and hold RESET for 3
seconds. Lock indication disappears.
QUICK COOK
SETTINGS
The QUICK COOK settings allow you
to cook or reheat food automatically
without entering power level or time.
For smaller portions, simply touch the
applicable pad and START/+30 SEC.
For larger portions, press the pad twice.
FROZEN DINNER, BAKED POTATO
and BEVERAGE allow you to cook
multiple amounts of the same food.
Simply touch pad once, and ENTER
AMT appears in the display. Enter the
amount of servings and start.
Page 14
POPCORN
1. Touch POPCORN.
2. CODE and cooking time appears in
the display. POPCORN automatically
sets the cooking time for a 3 to 3 1/2
oz. bag of microwave popcorn.
3. Touch START/+30 SEC.
NOTE: To change the preset POPCORN time:
Touch POPCORN twice. ENTER TIME
appears in display. Touch number
pads to enter minutes and seconds.
Touch START/+30SEC. This new
cooking time will remain whenever
you use the POPCORN setting.
BAKED POTATO
For 4 to 6 oz. potatoes:
1. Touch POTATO once.
2. Enter number of potatoes by
touching number pads from 1 to 4.
3. Touch START/+30 SEC.
For the large 8 to 10 oz. potatoes:
1. Touch POTATO twice.
2. Enter number of potatoes by
touching number pads from 1 to 4.
3. Touch START/+30 SEC.
PIZZA
Reheating a slice of pizza:
1. Touch PIZZA once. CODE and
cooking time appears.
2. Touch START/+30 SEC.
Heating a whole pizza:
1. Touch PIZZA twice. CODE and
cooking time appears.
2. Touch START/+30 SEC.