Recording Mode - JVC DR-MV5S Instructions Manual

BASIC RECORDING
30
EN
Basic Recording (VHS)
● Turn on the unit.
● Turn on the TV and select the AV mode.
● Slide the TV/DVD switch to DVD.
STANDBY/ON
S-VIDEO VIDEO AUDIO
VHS lamp
Accidental erasure prevention
To prevent accidental recording on
a recorded cassette, remove its
safety tab. To record on it later,
cover the hole with adhesive tape.
VHS DVD
VHS/DVD
VHS DUBBING
Record safety tab
1
Load a cassette with the record safety
tab intact.
● The unit's power comes on automatically and the counter
is reset to 0:00:00.
2
Press VHS/DVD on the unit repeatedly
or VHS on the remote control so that
the VHS lamp lights up on the unit.
REC
CH
DVD
DV IN
3
Press CH +/– or the number buttons to
select the channel you wish to record.
● If you record the programs received by cable box or DBS
receiver ...
1) Select "L-1" by pressing CH +/–.
2) Set the cable box or DBS receiver to the appropriate
channel.
4
Press REC MODE repeatedly to set the

recording mode.

5
Press 7 on the unit to start recording.
Or while holding 7, press 4 on the
remote control.
6
Press 9 to pause recording.
● You can select channel during the Record Pause mode.
● To resume recording, press 4.
7
Press 8 to stop recording.
Recording Resume Function
If there is a power outage during recording, Instant Timer
Recording (ITR) (
32), the recording will resume automatically when power is
restored to the unit unless the unit's memory backup has
expired.
Recording Mode
Recording
mode
SP
EP
pg. 61) or timer recording (
Maximum
recording
time
(approx.)
Select when the picture
2 hours
quality is important.
Select when the time is
6 hours important. You can record 3
times longer than SP mode.
pg. 31,
Use