Adjust the following settings for the built-in 5.1 channel
5.1 Speaker Setup
Select "5.1 Speaker Setup" on the Setup menu
using the 3 3 /4 4 buttons.
While "5.1 Speaker Setup" is selected, press 2
Use 2 2 buttons to select the desired speaker.
Adjust options by using 3 3 4 4 1 1 2 2 buttons.
Select a speaker that you want to adjust. ((Front speak-
ers (Left), Front speakers (Right), Center Speaker, Rear
speakers (Left), Rear speakers (Right), or Subwoofer))
Use 1 1 / 2 2 to adjust the output level of the selected
speaker. (-6dB ~ +6dB)
Since the speaker settings are fixed, you cannot change
If you connected speakers to your DVD/CD receiver ,
setting the Distance lets the speakers know how far the
sound has to travel to reach your listening point. This
allows the sound from each speaker to reach the listen-
er at the same time. (1 ft = 30.48 cm)
You can not set the distancefor the subwoofer speaker.
Press ENTER to test the signals of each speaker.
Adjust the volume to match the volume of test signals
memorized in the system.
Front Left (L)
Rear Right (R)
Rear Left (L)
Press ENTER to return to the previous menu.
Front Right (R)
Last Condition Memory
This DVD/CD receiver memorizes the user settings for
the last disc that you have viewed. Settings remain in
memory even if you remove the disc from the player or
switch off the player. If you load a disc that has its set-
tings memorized, the latest stop position is automatical-
– Settings are stored in memory for use any time.
– This DVD/CD receiver does not memorize settings of
a disc if you switch off the DVD/CD receiver before
commencing to play it.