Meter, Gauge, Indicator Unit
Separate the meter assembly [A] and upper meter cover
Meter Operation Inspection
Check 1-1: Switching Inspection
Turn the ignition switch on.
Check that the following.
ZX636E Model [A]
ZX636F Model [B]
The following Indicator lights (LED) go on for 1 second.
Yellow Shift Up Indicator Light (LED) [C]
Yellow Engine Warning Indicator Light (LED) [D]
Amber Fuel Level Warning Indicator Light (LED) [E]
Yellow KTRC Warning Indicator Light (LED) [F]
Yellow Warning Indicator Light (LED) [G]
The all LCD segments [H] appear for 3 seconds.
The tachometer needle [I] momentarily points their last
readings and back to the minimum position.
The yellow ABS indicator light [J] and the red warning
indicator light [K] go on.
If the meter unit does not work, replace the meter unit.
Refer to the Meter Unit Inspection for other indicator lights
By pushing the MODE button each time, check that the
display [A] changes as follows.
ELECTRICAL SYSTEM 16-65