Stator Coil Installation
Apply a non-permanent locking agent to the threads of
the stator coil bolts and tighten them.
Torque - Stator Coil Bolts: 12 N·m (1.2 kgf·m, 106 in·lb)
Using a high flash-point solvent, clean off any oil or dirt
that may be on the liquid gasket coating area. Dry them
with a clean cloth.
Apply liquid gasket to the circumference of the alternator
lead grommet [A], and fit the grommet into the notch of
the cover securely.
Sealant - Liquid Gasket, TB1211F: 92104-0004
Secure the alternator lead with a holding plate [B], and
apply a non-permanent locking agent to the threads of
the plate bolt [C] and tighten it.
Torque - Alternator Lead Holding Plate Bolt: 9.8 N·m (1.0
kgf·m, 87 in·lb)
Install the alternator cover (see Alternator Cover Installa-
Alternator Rotor Removal
Remove the alternator cover (see Alternator Cover Re-
Clean off the oil from the outer circumference of the rotor.
Hold the alternator rotor steady with the rotor holder [A],
and remove the rotor bolt [B] and washer.
Special Tools - Grip [C]: 57001-1591
Rotor Holder: 57001-1666
Stopper [D]: 57001-1679
Rotor Holder Attachment: 57001-1689
Using the flywheel puller [A], remove the alternator rotor
from the crankshaft.
Special Tool - Flywheel Puller Assembly, M38 × 1.5/M35 ×
Do not attempt to strike the alternator rotor itself.
Striking the rotor can cause the magnets to lose
Alternator Rotor Installation
Using a cleaning fluid, clean off any oil or dirt on the fol-
lowing portions and dry them with a clean cloth.
Crankshaft Tapered Portion [A]
Alternator Rotor Tapered Portion [B]
Install the alternator rotor.
ELECTRICAL SYSTEM 16-33