KIBS (Equipped Models)
The yellow ABS indicator light (LED) [A] and yellow warn-
ing indicator light (LED)/KIBS warning symbol [B] may
light if the tire pressure is incorrect, a non-recommended
tire is installed, or the wheel is deformed. If the indica-
tor light lights, remedy the problem and clear the service
Use of non-recommended tires may cause malfunc-
tioning of KIBS and can lead to extended braking
distance resulting in an accident causing serious
injury or death. Always use recommended stan-
dard tires for this motorcycle.
The yellow ABS indicator light (LED) may come on if the
engine is run with the motorcycle on a stand and the trans-
mission in gear. If the indicator light comes on, just turn
the ignition switch off, then clear service code b 42, which
indicates a "Faulty front wheel rotation sensor".
When the KIBS operates, the KIBS makes noise and the
rider feels the reaction force on the brake lever and brake
pedal. This is a normal condition. It informs the rider that
the KIBS is operating normally.
Service codes detected once by the KIBS hydraulic unit
will be memorized in the KIBS hydraulic unit.
A fully charged battery is a must for conducting reliable
self-diagnosis. Test run the motorcycle at a speed of more
than 20 km/h (12 mph) to see that the yellow ABS indica-
tor light (LED) and yellow warning indicator light (LED) do
not come on. Finally, test run the motorcycle at a speed
of more than 30 km/h (20 mph) and brake suddenly to see
that the motorcycle stops without loss of steering control
and the KIBS operates normally (The reaction force gen-
erated is felt in the brake lever and pedal.). This com-
pletes the final inspection.