Assemble Your Device - Samsung Galaxy S6 Edge User Manual

Assemble Your Device

This section helps you to
assemble your device.
Install the SIM Card
When you subscribe to a cellular network, you are
provided with a plug-in SIM card. During activation,
your SIM card will be loaded with your subscription
details, such as your PIN, available optional
services, and other features.
Warning: Please be careful when handling the SIM
card to avoid damaging it. Keep all SIM cards out of
reach of small children.
Caution: Exercise care when using the metallic
removal tool to eject the internal SIM card slot.
1. Insert the removal tool into the hole on the SIM
tray, and push until the tray pops out.
2. Place the SIM card on the tray, and slide the tray
back into the slot.
Caution: If the card is not inserted correctly, the
device will not detect the SIM card. Re-orient the
card and place it back into the slot if the SIM is
not detected.
Getting Started
DRAFT
FOR INTERNAL USE ONLY
Charge the Battery
Before turning on your phone, charge it fully.
Your phone comes with an Adaptive Fast Charging
charger and a USB cable. Plug the smaller end of
the cable into the USB/Charger port on your phone
and the other end into the charger. Then plug the
charger into an electrical outlet to charge the phone.
Caution: Use only Samsung-approved charging
devices and batteries. Samsung accessories are
designed to maximize battery life. Using other
accessories may invalidate your warranty and may
cause damage.
1. Insert the USB cable into the port.
2. Connect the USB cable to the charging head,
and then plug the charging head into a standard
outlet.
3. When charging is complete, unplug the charging
head from the outlet and remove the USB cable
from the device.
Caution: Failure to unplug the wall charger before you
remove the battery, can cause damage to the device.
4 Assemble Your Device