Code 128; Enable/Disable Code 128 - Motorola DS6708 Product Reference Manual

Code 128

Enable/Disable Code 128

Parameter # 08h
To enable or disable Code 128, scan the appropriate bar code below.
*
Enable Code 128
Set Lengths for Code 128
Parameter # L1 = D1h, L2 = D2h
The length of a code refers to the number of characters (i.e., human readable characters), including check digit(s)
the code contains. Set lengths for Code 128 to any length, one or two discrete lengths, or lengths within a specific
range.
NOTE When setting lengths for different bar code types, enter a leading zero for single digit numbers.
•
One Discrete Length - Select this option to decode only Code 128 symbols containing a selected length.
Select the length using the numeric bar codes in
only Code 128 symbols with 14 characters, scan Code 128 - One Discrete Length, then scan 1 followed by
4. To correct an error or change the selection, scan
•
Two Discrete Lengths - Select this option to decode only Code 128 symbols containing either of two
selected lengths. Select lengths using the numeric bar codes in
example, to decode only Code 128 symbols containing either 2 or 14 characters, select Code 128 - Two
Discrete Lengths, then scan 0, 2, 1, and then 4. To correct an error or change the selection, scan
Cancel on page
•
Length Within Range - Select this option to decode a Code 128 symbol with a specific length range.
Select lengths using numeric bar codes in
Code 128 symbols containing between 4 and 12 characters, first scan Code 128 - Length Within Range.
Then scan 0, 4, 1, and 2 (enter a leading zero for single digit numbers). To correct an error or change the
selection, scan
•
Any Length - Select this option to decode Code 128 symbols containing any number of characters within the
digital scanner's capability.
(01h)
D-2.
Cancel on page D-2.
Disable Code 128
Appendix D, Numeric Bar
Cancel on page
Appendix D, Numeric Bar
Appendix D, Numeric Bar Codes.
Symbologies 13 - 27
(00h)
Codes. For example, to decode
D-2.
Codes. For
For example, to decode