Connecting Using Scanner Emulation - Motorola DS6708 Product Reference Manual

10 - 2 DS6708 Digital Scanner Product Reference Guide

Connecting Using Scanner Emulation

To perform Scanner Emulation, connect the digital scanner to a mobile computer, or a controller which collects the
data and interprets it for the host.
Scanner Emulation Connection
Figure 10-1
Scanner Emulation Connection for Scanner with Base
Figure 10-2
NOTE Interface cables vary depending on configuration. The connectors illustrated in
10-2
the scanner are the same.
Attach the modular connector of the Scanner Emulation interface cable to the cable interface port on the digital
1.
scanner. See Installing the Interface Cable on page
Connect the other end of the Scanner Emulation interface cable to the scanner port on the mobile computer or
2.
controller.
Host Port Connector
Host Port Connector
are examples only. The connectors may be different than those illustrated, but the steps to connect
Interface Cable
Interface Cable
1-3.
Figure 10-1 and Figure