Rack Dry - LG RC8055*H Series Owner's Manual

Heat pump dryer
Hide thumbs Also See for RC8055*H Series:
Table of Contents

Advertisement

Operating Your Dryer

Rack Dry

The dryer rack is placed inside the dryer as
seen in the picture below. Remove and
discard packing material before use.
The Rack Dry is designed for use with items
that must be dried flat, without tumbling,
including sweaters and delicate fabrics.
To use the Rack Dry :
1. Open the door.
2. Do not remove the filter.
3. Place drying rack over the bottom of
the dryer door opening.
Reset the rack on the dryer back
lodge.
Push down on the frame front to
secure over filter.
4. Place wet items on top of the rack.
Allow space around items for air to
circulate.
The rack does not move, but the drum
will rotate.
5. Close the door.
6. Turn power on and select Rack Dry.
16
NOTE
Check the filter and remove any lint
accumulated from items dried on the
rack.
1. Insert wire
edge to the
drum
center.
2. Place
delicate
fabrics or
sports
shoes.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents