Download  Print this page

Advertisement

Tightening Torque
Handlebar Holder Nuts:
34 N·m (3.5 kgf·m, 25 ft·lb)
Install the handlebars (see Handlebar Installation
in this section).
MAINTENANCE AND ADJUSTMENT

Brakes

Disc and disc pad wear is automatically compen-
sated for and has no effect on the brake lever or
pedal action. There are no parts on the brakes that
require adjustment except brake lever position.
Brake Lever Position
The brake lever position can be adjusted to suit
the rider's preference.
To adjust the brake lever position, slide the front
brake lever dust cover back, and loosen the lock-
nut, and turn the adjuster to either side with a
wrench.
After adjustment, tighten the locknut securely.
WARNING
An improperly adjusted brake could drag
and cause the brake to overheat, damaging
the brake assembly and possibly locking the
rear wheel, resulting in loss of control. Al-
ways maintain the proper brake adjustment.
101
j

Advertisement

Table of Contents

   Also See for Kawasaki KX85

This manual is also suitable for:

Kx100Kx85 2015

Comments to this Manuals

Symbols: 0
Latest comments: