KYMCO Mini LS Opearting Manual page 74

Work Shop use only-Adjusting the TOE-IN(2)
Step 2: Measure the tyre's "toe-in"
Separately measure the figure between the upper and
lower side.
For Midi XL, should setting the standard point as picture.
Step 3: Adjusting the longer rod's figure
- For tyre's "toe-in", the upper distance should be less
than the lower one.
Standard: Maxi
Midi XL& Midi 0~4 mm
Mini & Micro 0~3 mm
To tighten the rod's nuts after adjusting
Lower
Standard
poin
0~5 mm
Correct
Wrong
Upper
t
Forward
73