Registering Online - Kensington 3217 User Manual

33217 Pocket Hub FireWire 3/11/05 9:50 AM
Connecting your PocketHub FireWire
If you are using this product on a windows PC, you
must have FireWire (also known as IEEE 1394) enabled.
FireWire is generally enabled through an add-on PCI
(or expansion) card, or is built-in to newer computers.
You do not need to turn off your computer before connect-
ing or disconnecting a FireWire device. The included AC
power adapter must be used for maximum performance.
To connect to a Do this:
FireWire port • Plug the cable into your computer's
FireWire port.
FireWire port • Connect the 6-pin FireWire connector
into the FireWire hub. This cable is
included in the package.
Note: This product will not function
with FireWire 800
Page 2

Registering Online

Take a minute to register your Kensington input device.
Registered customers are eligible to receive free technical
support, notification of new products, and software
updates. To register, start your Web browser and go to:
www.register.kensington.com