LG 60PCLD Owner's Manual page 61

Lcd tv and plasma tv
Table of Contents

Advertisement

Reference
i
P ro g r a m m ng t:h e Re m ot:e
The remote control is a multi-brand or universal remote control. It can be programmed to operate most
remote-controllable
devices of other manufacturers.
Note that the remote control may not control all models of other brands.
TV INPUT
INPUT
[.-
i ° F_S"Bd
EZPIC
EZ SOUND
SAP
CC
CCC) CCD CCC) CCC)
ADJUST
(ZD
2
3
4
5
6
Test your remote control.
To find out whether your remote control can operate the component
without programming,
turn on the component such as a VCR and press
the corresponding
MODE button (VCR) on the remote control, while
illuminating on the selected component. Test the POWER button to see
if the component
responds properly. If not, the remote requires pro-
gramming to operate the device.
Turn on the component to be programmed,
then press the correspond-
ing MODE button on the remote control.
Press the MENU and MUTE buttons simultaneously
for 2 seconds, the
button selected component
lights on the remote control. If you don't
press any button for 20 seconds, the button selected component will turn
off on the remote control. At a moment, you have to repeat from step 2.
Enter a code number using the number buttons on the remote. When
pressing the button, the light is blinked at a time. Programming
code
numbers for the corresponding
component can be found on the follow-
ing pages. Again, if the code is correct, the device will turn off.
Press the MENU button to store the code. After blinking twice, this code
is stored.
Test the remote control functions to see if the component
responds
properly. If not, repeat from step 2.
61

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents