Program Keys; Program Reporter - Honeywell LYNX Touch L5200 Series Programming Manual

Hide thumbs Also See for LYNX Touch L5200 Series:
Table of Contents

Advertisement

Screen Display

Program Keys

Keys
Key Type
4 Button Key
User
Serial Number
0
Zone
140
Button Key * - Zone *

Program Reporter

Reporter
Primary CS Info
Function & Programming Options
Keys
Select from the following options:
Edit
If add new is selected the following options can be programmed:
Key Type
Serial Number
Button Key 1 – Zn 140
Button Key 3 – Zn 142
Button Key 5 – Zn 144
Button Key 7 – Zn 146
Key Type
1 Button Key.
2 Button Key
4 Button Key
6 Button Key
8 Button Key
User
Master
Duress
Guest
User 3 through User 30 (L5200CN)
User 3 through User 46 (L7000CN)
Note: The Key must be associated with a specific User/User Code in order for it to operate. Refer to the
LYNX Touch User Guide for additional Information regarding User Codes.
Serial Number
When "Serial Number" has been selected "Enter Serial Number or Activate" is displayed.
The transmitter serial number and loop number can be enrolled via RF transmission OR
manually.
Enroll via RF Learning To enroll the device using RF Learning mode three transmissions
(open/close) of the device will be required. The initial transmission activates the RF
Learning mode. A second transmission enrolls the serial number and the system beeps two
times and displays "Activate Sensor Again To Confirm". A third transmission will confirm the
serial number. The system beeps two times and returns to the Zone programming Screen.
Enroll Manually
Enter the 7-digit serial number printed on the transmitter using the displayed keypad and
select "Done". The system beeps one time and returns to the Zone programming Screen
Zone
Manually enter a specific two-digit Zone Number (140-155 L5200 OR 140-163 L7000).
Button Key * Zn *
Enter a function for each button key from the following options:
Disarm
Arm Stay
24 Hour Silent
24 Hour Auxiliary
Fire No Verification
* Options are the same for each Button/Zone combination.
Reporter
Note: The Follow Me Phone features are not available on the LYNX Touch L7000CN.
Program the following options:
Primary CS Info
Follow Me Phone 1
Report Selection
Downloader
Primary Central Station Information
Phone Type
Communicator Type
Add New
Delete
User
Zone
Button Key 2 – Zn 141
Button Key 4 – Zn 143
Button Key 6 – Zn 145
Button Key 8 – Zn 147
Arm Away
No Response
24 Hour Audible
Silent Burglary
Secondary CS Info
Follow Me Phone 2
Options
- 9 -

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Lynx touch l7000 series

Table of Contents