Table of Contents
Advertisement
Reverse Side
― The colour and shape of parts may differ from what is shown. Specifications are
subject to change without notice to improve quality.
Port
IR OUT
CONTROL IN
DP IN
HDMI IN 1, HDMI IN 2
DP OUT (LOOPOUT)
DVI IN (MAGICINFO)
RGB IN
AV / COMPONENT IN
AUDIO OUT
AUDIO IN
RJ45
USB
RS232C OUT
RS232C IN
SD CARD
Description
Receives the remote control signal via the external sensor board and outputs the
signal via LOOP OUT.
Supplies power to the external sensor board or receives the light sensor signal.
Connects to a PC using a DP cable.
Connects to a source device using an HDMI cable.
Connects to another product using a DP cable.
DVI IN: Connects to a source device using a DVI cable or HDMI-DVI cable.
MAGICINFO: To use MagicInfo, make sure to connect the DP-DVI cable.
Connects to a source device using a D-SUB cable.
Connects to a source device using the AV/Component adapter.
Connects to the audio of a source device.
Receives sound from a PC via an audio cable.
Connects to MDC using a LAN cable.
Connect to a USB memory device.
Connects to MDC using an RS232C cable.
Connect to an SD memory card.
Advertisement
Table of Contents
Troubleshooting
