Download  Print this page

Standby Control; Power Button - Samsung UD46D-P User Manual

Lfd display.
Hide thumbs

Advertisement

Table of Contents
Power Control
Auto Power On
PC module power
Max. Power Saving

Standby Control

Power Button

Network Standby
- The displayed image may differ depending on the model.
Off
On
Auto
Power on only
Off
Standby Control
You can set the screen standby mode to be applied when an input signal is received.
Auto
Power-saving mode will activate if no input signals are detected even though a source device is connected to the display.
The message
No Signal
will appear if no source device is connected.
Off
No Signal
The message
will appear if no input signals are detected.
― The
Standby Control
option is only enabled when
― If
No Signal
is displayed although a source device is connected, check the cable connection.
― If
No Signal Message
is set to Off,the
No Signal Message
If this is the case, set
On
Power-saving mode will activate if no input signals are detected.
Power Button
The power button can be set to either turn on the power or turn on/off the power.
Power on
only: Set the power button to turn on the power.
Power on and
off: Set the power button to turn on/off the power.
Network Standby
This feature keeps the network power on when the product turns off.
Off
On
/
Source
is set to PC, DVI, HDMI1,
No Signal
message does not appear.
to On.
HDMI2
or DisplayPort.

Advertisement

Table of Contents

   Also See for Samsung UD46D-P

Comments to this Manuals

Symbols: 0
Latest comments: