Selecting The Scan Contrast - Xerox 665 User Manual

WorkCentre Pro 665/685/765/785

Selecting the Scan Contrast

To select the Scan Contrast:
Press the Contrast key until the required contrast mode is indicated
by a Contrast LED
Note: When a Contrast LED is not illuminated, the Contrast
setting is Normal.
The Contrast setting adjusts the print darkness of the copy or
transmitted document. The default contrast setting is normal on base
machine. The machine returns to the default setting after each
transmission.
Refer to the
System Administrator's Guide
default setting for contrast.
The following table describes the available contrast selections
Contrast selection
Normal
Lighten
Darken
for details about changing the
Description
For documents printed with ordinary image density.
Selected when the Contrast LED is off.
For documents with dark print that need to be
adjusted to print lighter.
For documents with light or faint print that need to be
adjusted to print darker.
Getting Started
4-13