Control Panel Components And Function Keys - Xerox 665 User Manual

Item Description
1 Display
2 PC LED
3 Line 1 LED
4 Line 2 LED
5
6
Delete or *
7
Exit or *
8
9
10
WorkCentre Pro 665/685/765/785

Control Panel Components and Function Keys

The Control Panel is used to program the features and to initiate
communications. The following figures and tables illustrate the
Control Panel and describe each component.
Displays the machine status and messages. The display provides
information about the current operation mode. The machine has the
following operating modes: Standby Mode, Communication Mode,
Menu Mode, Copy Mode, PC Printing Mode, (see "Operation
Modes" later in this Chapter).
Illuminates when a PC communication is in progress.
Illuminates when a fax communication is in progress on line 1.
Illuminates when a fax communication is in progress on line 2.
The Menu key is used to access menu items listed in the menu
Menu
map which are not available from the direct access keys. The
Menu key is also used as a navigation key for scrolling up a
menu list.
Deletes the character at the position of the cursor.
* Used on International machines.
Used to Exit a menu list.
Left or Back navigation key used for going back to a previous
menu list. Also used for positioning the cursor for character
delete or insert when you enter names.
Down navigation key used for scrolling down a menu list.
Right navigation key used for going to the next level of menus of
the highlighted item. Also used when you enter names for
positioning the cursor for character delete or insert.
Machine Overview
Function
3-7