Timer Recording Using On Screen Display - LG LH-CX245 Owner's Manual

Timer recording using On Screen
Display
You may set up to seven timer record events within one
month of the current date.
Note
Before setting the timer make sure that you have set the
DVD/VCR Combi receiver clock correctly and you
know which stations you have tuned TV stations on
your DVD/VCR Combi receiver.
1. Insert a video cassette with protection tab into your
DVD/VCR Combi receiver.
The video cassette should have the window side
facing up and the arrow facing away from you.
2. Press i.
Press 1 or 2 to select REC.
Press OK.
3. Press OK to start setting the timer record event.
If all timer record events are full press 3 3 or 4 4 to
select the event that you wish to remove and
replace. Press 1 to delete the event.
PR DATE
- - - -
- - - -
- - - -
- - - -
- - - -
- - - -
- - - -
4. Press the numbered buttons to enter the station
that you wish to record.
When selecting stations 1 - 9, press 0 first, then
the channel number; for example Stations 3 - 03.
You may also select Channels by pressing 3 3 or 4 4 .
Once selected press 2.
If you wish to record from AUDIO IN (L/R) and
VIDEO IN on the front or from the EURO SCART
sockets on the back of your unit, press AV to select
for correct display (AV1, AV2 or AV3).
PR
PR-01
- -
- -
- -
- -
- -
- -
5. Press the numbered buttons to enter the date of
the programme. If you press OK before entering
the date you may select one of the following
automated recording features. Press 1 or 2 to
select, then press OK to confirm.
DLY To record every day (except Saturday and
Sunday) at the same time.
SU~SA To record at the same time every week.
PR DATE
PR-01
- -
- -
- -
- -
- -
- -
DLY SU MO TU WE TH FR SA
30
T I M E
- - - - - - - - : ~ : SP
- - - - - - - - : ~ : SP
- - - - - - - - : ~ : SP
- - - - - - - - : ~ : SP
- - - - - - - - : ~ : SP
- - - - - - - - : ~ : SP
- - - - - - - - : ~ : SP
i
DATE T I M E
- - - - - - - - - - : ~ : SP
- - - - - - - - - - : ~ : SP
- - - - - - - - - - : ~ : SP
- - - - - - - - - - : ~ : SP
- - - - - - - - - - : ~ : SP
- - - - - - - - - - : ~ : SP
- - - - - - - - - - : ~ : SP
i
T I M E
- - - - - - - - : ~ :
16 SP
- - - - - - - - - - : ~ : SP
- - - - - - - - - - : ~ : SP
- - - - - - - - - - : ~ : SP
- - - - - - - - - - : ~ : SP
- - - - - - - - - - : ~ : SP
- - - - - - - - - - : ~ : SP
OK
i
6. Press the numbered buttons to enter the recording start
and end times of the programme that you wish to record.
Please note your DVD/VCR Combi receiver uses a
24 hour clock. e.g. 1pm will be displayed as 13:00.
You may also select the the start and end times by
pressing 3 3 or 4 4 .
PR DATE T I M E
PR-01 16 19 00 20 :
- - - - - - - - - - - - :
- - - - - - - - - - - - :
- - - - - - - - - - - - :
- - - - - - - - - - - - :
- - - - - - - - - - - - :
- - - - - - - - - - - - :
7. Press 3 3 or 4 4 to switch VPS on or off.
Press 2 to select the recording speed.
Press 3 3 or 4 4 to select the desired tape speed (SP, IP, or LP).
IP mode determines how much tape is left and
switches speed from SP to LP, if necessary, to
complete recording the program. IP mode is not
selected when VPS is ON.
PR DATE
T I M E
16 19 00 20 00 :
PR-01
- - - - - - - - - - - - :
- - - - - - - - - - - - :
- - - - - - - - - - - - :
- - - - - - - - - - - - :
- - - - - - - - - - - - :
- - - - - - - - - - - - :
8. Check that the timer event details are correct.
Press i twice.
If PLEASE CHECK is displayed, you have entered
incorrect and will need to re-enter the data.
Press POWER to switch your DVD/VCR Combi
receiver Standby. will appear in the display win-
dow while your DVD/VCR Combi receiver waits to
make the recording. To watch a DVD during timer
recording standby mode, press POWER and DVD
to switch to DVD mode.
9. Press STOP to end recording.
Notes
• If at a later date you wish to delete or change any of
the settings in timer event memory you may do so
without having to enter all the timer event information
again. Simply display the timer event screen. Press 3 3
or 4 4 to select the event that you wish to delete or
change.
Press 1 to delete the event...or
Press OK to change; then press 1 or 2 to select;
Station, Date, Start and End times and LP. Press 3 3
or 4 4 to enter the correct information.
• If Timer record events Overlap...
Make sure that the preset times of the timer recording
events do not overlap. If they do, the earlier
programme will always be given priority.
Example:
Programme 1 is programmed to start at 16:00 and end at
17:00.
Programme 2 is programmed to start at 16:30 and end at
17:30.
(In this case, Programme 1 will be recorded in its entirety, but
only the last 30 minutes of Programme 2 will be recorded.)
~ : 00
SP
~ : SP
~ : SP
~ : SP
~ : SP
~ : SP
~ : SP
i
~ :
SP
~ : SP
~ : SP
~ : SP
~ : SP
~ : SP
~ : SP
i