Hookup And Settings; Rear Panel; Connecting To The Aerial - LG RH188H Owner's Manual

Hookup and Settings

Rear Panel

a b
j k
a AERIAL
Connect the aerial to this terminal.
b HDMI Connector (Type A)
(RH188H, RH199H only)
HDMI output providing a high quality interface for
digital audio and video.
c EURO AV 2 DECODER
Connect the audio/video output of an external
source (Pay-TV decoder, Set Top Box, VCR, etc.).
d AV OUT 3 (VIDEO / AUDIO OUT (Left/Right))
Connect to a TV with video/audio inputs.
e AV IN 3 (VIDEO IN/AUDIO IN (Left/Right))
Connect the audio/video output of an external
source (Audio system, TV/ Monitor, VCR,
Camcorder, etc.).
f COAXIAL (Digital audio out jack)
Connect to digital (coaxial) audio equipment.
g OPTICAL (Digital audio out jack)
Connect to digital (optical) audio equipment.
h Cooling fan

Connecting to the Aerial

Remove the aerial cable plug from your TV set and
insert it into the aerial socket at the back of the
recorder. Plug one end of the aerial cable into the TV
socket on the recorder and the other end into the
aerial input socket on your TV set.
RF coaxial connection
Connect the RF. OUT jack on the recorder to the
aerial input jack on the TV using the 75-ohm Coaxial
Cable supplied (R). The RF. OUT jack passes the
signal through from the AERIAL jack.
10
c d e f g
l m n
h
i AC Power Cord
Plug into the power source.
j RF. OUT
Passes the signal from the AERIAL to your
TV/monitor
k S-VIDEO OUT
Connect to a S-Video Input on TV.
l EURO AV 1 AUDIO/VIDEO
Connect to a TV with SCART jack.
m VIDEO OUT SELECT Switch
Select either COMPONENT or RGB signal of
EURO AV1 AUDIO/VIDEO terminal depending on
how you connect the recorder to the TV.
n COMPONENT/PROGRESSIVE SCAN VIDEO
OUT (Y Pb Pr)
Connect to a TV with Y Pb Pr inputs.
Aerial
ANTENNA
INPUT
R
i
Rear of TV
SCART INPUT
VIDEO
AUDIO INPUT
INPUT
L R
Rear of the recorder