Download  Print this page

Computer Requirements; Placing The Rubber Feet On The Cable Modem - RCA dcm235 User Manual

Cable modem
Hide thumbs

Advertisement

Table of Contents

Computer Requirements

Personal computer with the following minimum system requirements (note that the
minimum requirements may vary by cable company):
CPU
System RAM
Operating System
Available Disk Space
Video
CD-ROM Drive
Ethernet
USB Port
Mac Users: Mac OS or any other OS other than Windows 98SE or 2000 are not currently
supported for USB installation. Please use the Ethernet connection.
Placing the Rubber Feet on
the Cable Modem
A set of rubber pads have been packaged with your
modem. These pads (or "feet") can be attached to keep
the modem from sliding around on your desktop.
You have 2 options for placing the pads:
Option 1: Attach the pads to the four slight
indentations on the back of the modem.
Option 2: Attach the pads to the "rudders" on the
bottom of the cable modem. Be sure to
equally space the pads for best results.
* Windows is a trademark of the Microsoft Corporation
** Macintosh and the Mac OS are trademarks of Apple Computer, Inc.
IBM PC COMPATIBLE
Pentium preferred
16MB (32MB preferred)
Windows* 95/98/98SE/2000/NT
Linux
125MB
VGA or better (SVGA preferred)
Required
10BaseT or 100BaseT
An Ethernet card makes it possible for your computer to pass data to
and from the internet. You must have an Ethernet card and software
drivers installed in your computer. You will also need a standard
Ethernet cable to connect the Ethernet card to your cable modem.
USB (Windows 98SE/2000 only)
The Universal Serial Bus is a high speed bus that enables your
computer to communicate simultaneously with a variety of
peripherals. However, if you have other peripherals that send and
receive a lot of information, such as speakers, printers or scanners,
we recommend using an Ethernet card to support this modem.
introduction
MACINTOSH**
PowerPC or higher
24MB (32MB preferred)
Mac OS** 7.6.1 or higher
50MB
VGA or better (SVGA built-in preferred)
Required
10BaseT or 100BaseT
N/A
Option 2:
Equally space the feet on
the bottom of the unit
Option 1:
Attach the
pads to the
indentations
on the back
3

Advertisement

Table of Contents
loading

  Related Manuals for RCA dcm235