Download  Print this page

Vacuuming Carpet; Vacuuming Hard Surfaces And Using Tools; Edge Cleaning; Automatic Carpet Height Adjustment - Maytag M700 Owner's Manual

Floor to ceiling cleaning and multi-surface performance
Hide thumbs



Vacuuming Carpet

For carpet cleaning, slide the
Carpet / Floor Selector toward the
back of the nozzle so that it reads
"Carpet" (Fig. 1).
Vacuuming Hard Surfaces
and Using Tools
For cleaning bare floors or using tools, slide
the Carpet / Floor Selector toward the front
Fig. 1
of the nozzle so that it reads "Floor & Tools".
This prevents the brushroll from spinning and
potentially damaging your floor (Fig. 2).

Edge Cleaning

The edge cleaning feature provides improved
cleaning of carpets near walls and stationary
furniture. For maximum edge cleaning, place
the right side of the nozzle against the wall
Floor & Tools
or furniture.
Fig. 2

Automatic Carpet Height Adjustment

Your vacuum cleaner is designed with an
automatic self-adjusting nozzle. No manual
adjustments are required. The height of the
nozzle automatically adjusts to the carpet
pile height. This self-adjusting feature allows
the nozzle to float evenly over all carpet
pile surfaces.


Table of Contents