Hob - Helpful Hints And Tips - Zanussi ZCI68300WA User Manual

Table of Contents

Advertisement

Activating the child safety lock
1. Make sure that the hob is deactivated.
There must be no symbols shown in the
control panel, except for
2. Touch
for 4 seconds. The symbol
flashes in the control panel.
3. Touch
while the symbol
4. The display shows
child safety lock is activated.
To deactivate the child safety lock, do the
steps again. The display shows
seconds. The child safety lock is deactivated.
Deactivating the child safety lock for one
cooking session
1. Activate and deactivate the necessary
cooking zone.
2. While the display shows
til the display shows
3. Set the heat setting for the cooking zone
in less than 4 seconds.
4. When you deactivate the hob, the child
safety lock operates.
Automatic switch-off
The hob deactivates automatically if:

Hob - Helpful hints and tips

Warning! Refer to the Safety chapters.
Cookware for induction cooking zones
Important! In induction cooking, a powerful
electromagnetic field almost instantly
generates heat inside the cookware.
Cookware material
• Correct: cast iron, steel, enamelled steel,
stainless steel, a multi-layer bottom (marked
as correct by the manufacturer).
• Incorrect: aluminium, copper, brass, glass,
ceramic, porcelain.
Cookware is correct for an induction hob
if:
• Water boils very quickly on a zone set to the
highest heat setting.
www.zanussi.com
/
/
.
flashes.
for 4 seconds. The
for 4
, touch
un-
.
• All cooking zones are deactivated
• You spill something or put something on the
hob control panel for more than 10 seconds
(a pan, a cloth, etc.). An acoustic signal
sounds and the hob deactivates. Remove
the object or clean the control panel.
• The hob becomes too hot (e.g. when a sau-
cepan boils dry). Before you use the hob
again, the cooking zone must be cool.
• You use incorrect cookware. The display
shows the symbol
deactivates automatically after 2 minutes.
• You do not deactivate a cooking zone or
change the heat setting. After some time
(see the table), the display shows the sym-
bol
and the hob deactivates.
Heat setting
-
-
-
• You can attach a magnet to the bottom of
the cookware.
The bottom of the cookware must be
as thick and flat as possible.
Cookware dimensions: induction cooking
zones adapt to the dimension of the bottom of
the cookware automatically to some limit. But
the magnetic part of the bottom of the cook-
ware must have a minimum diameter.
Cooking zone
Right rear —
180 mm
Right front —
180 mm
.
and the cooking zone
Switch-off time
6.0 h
5.0 h
4.0 h
1.5 h
Minimum cookware
diameter [mm]
145
145
11

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Zci68300xaZci68300ba

Table of Contents