Problem Solving Guide - Miele CS 1018 Operating And Installation Instructions

,
Repairs to the gas and electrical
components of this appliance must
only be carried out by a suitably
qualified and competent person to
ensure safety. Repairs and other
work by unqualified persons could
be dangerous. The manufacturer
cannot be held liable for
unauthorised work.
What to do if...
... the burner does not ignite after
several attempts.
Check whether
– the burner is correctly assembled.
– the gas supply tap is turned on.
– the burner is dry and clean.
– the flame slits are dry and
unblocked.
... the gas flame goes out after being
lit.
During the ignition process, the flames
need to touch the ignition safety device
so that it heats up.
If the flames do not touch the ignition
safety device, check that
– the burner cover is correctly in
position.
– there is no soiling on the ignition
safety device. If there is, remove it
carefully (see "Cleaning and care").

Problem solving guide

.... the ignitor on the burner does not
spark.
Check whether
– the mains fuse has blown. If it has,
contact a qualified electrician or the
Miele Customer Contact Centre.
– food deposits have lodged
themselves between the ignitor and
the burner cap, or on the ignition
safety device.
Remove any food deposits carefully
(see "Cleaning and care").
– food has adhered to the ignition
safety device.
Remove any food deposits carefully
(see "Cleaning and care").
... the flame suddenly looks different.
Check that the burner is correctly
assembled.
31