Access Codes; Pin1 Code (4 To 8 Digits); Pin2 Code (4 To 8 Digits); Puk1 Code (4 To 8 Digits) - LG -600 User Manual

Access Codes

You can use the access codes described in this section to avoid
unauthorised use of your phone. PIN1 / PIN2 codes and Security code can
be changed by using [Menu 4-2]. See the following section.

PIN1 code (4 to 8 digits)

The PIN (Personal Identification Number) code protects your SIM card
against unauthorized use. The PIN code is usually supplied with the SIM
card. When the PIN code request is enabled [Menu 4-1-1], the code is
asked each time you try to change PIN code or enable/disable PIN code
request, or your phone is switched on. If you change the PIN code, mark a
note of it but keep separate from the phone.

PIN2 code (4 to 8 digits)

The PIN2 code, supplied with some SIM cards, is required to access some
functions such as Advice of call charge, Fixed Dial number. These
functions are only available if supported by your SIM card.

PUK1 code (4 to 8 digits)

The PUK(Personal Unblocking Key) code is required to change a blocked
PIN code. The PUK code may be supplied with the SIM card. If not, contact
your local service provider for the code. If you lose the code, also contact
your service provider.

PUK2 code (4 to 8 digits)

The PUK2 code, supplied with some SIM cards, is required to change a
blocked PIN2 code. If you lose the code, also contact your service provider.

Security code (4 to 8 digits)

The security code protects the unauthorized use of your phone. It is usually
supplied with the phone. This code is required to delete all phonebook entries.
22
4-2
PIN Enable
Change Codes
Fixed Dial No.
O K B a c k
Getting Started
4-2-1
P I N 1
P I N 2
Security Code
O K B a c k