Corsair GRAPHITE 780T Installation Manual page 5

GRAPHITE SERIES
1. Removing the Side Panels
Simply pull upward on the side
panel latches to release.
Note: Corsair recommends
removing both side panels and
setting them aside when building
your system to avoid accidental
damage. Both side panels are
interchangeable and should be
removed to reduce clutter.
2. Install the Motherboard
First, install your
motherboard's I/O shield (see
your motherboard's manual
for guidance).
Then, align your motherboard
with the pre-installed
stando s, and use the
provided screws to secure
the motherboard to the
motherboard tray.
5
780T
®
3. Install the PSU
Position the PSU on the bottom of the
case then align the case holes and secure
the PSU with the screws provided with
your power supply.
4. Install PCI-E/PCI Card(s)
First, remove thumbscrews
and corresponding slot
cover(s). Then, install the
add-on card and secure with
thumbscrews.
6