Download Print this page

Cisco Surge-Gap Installation Instructions Manual page 11

Drop amplifier
Hide thumbs

Advertisement

Installing the Surge-Gap Drop Amplifier,
6.
Make all connections to the drop amplifier as shown in the diagram below.
7.
Plug the AC adapter into the AC outlet.
Note: Retain the protective cap on the unused DC input port for additional
protection.
8.
When the drop amplifier (with power indicator) is used, check to make sure
that the LED is lit once power is supplied to the amplifier.
Drop Amplifiers and Accessories Part Numbers
Part Number
730214
730215
730216
4000254 Rev C
Description
Surge-Gap Drop Amp (40/51) with power
indicator, 1 port, 120 V AC power supply
Surge-Gap Drop Amp (40/51) with power
indicator, 2 port, 120 V AC power supply
Surge-Gap Drop Amp (40/51) with power
indicator, 4 port, 120 V AC power supply
Surge-Gap Drop Amplifier Installation Instructions
Continued
Gain Per Port
15 dB
11 dB
7 dB
11

Advertisement

loading

  Related Manuals for Cisco Surge-Gap