Canon MB2300 series Online Manual page 195

Caution
• Do not hold the print head holder to stop or move it forcibly. Do not touch the print head holder
until it stops completely.
Important
• Do not remove an ink tank until a new one is prepared to be installed.
• Once you remove an ink tank, the machine will not operate until a new one is installed.
• Once you remove an ink tank, the machine will not operate even if the removed ink tank is
just reinstalled.
• You cannot remove the ink tank which is not placed at the replacement position. Removing it
forcibly may cause the machine to malfunction or damage the machine.
• Do not touch the metallic parts or other parts inside the machine.
• If the front cover is left open for more than 60 minutes, the print head holder moves to the right.
In this case, close and reopen the front cover.
Note
• If the message for the ink tank replacement is displayed on the touch screen, check it and then
tap OK.
2. When an ink tank for replacement is displayed on the touch screen, push up the ink tank
eject lever (B).
The ink tank will be ejected.
When you want to replace another ink tank, tap Next to display the screen for the ink tank to replace.
195