Machine Settings; Alarm Signal Permanent Off - John Lewis JLDV 09 Instruction Manual

Tumble dryer
Table of Contents

Advertisement

Warning! For safety reasons, the
cover must be screwed down tightly.
If this is not done, the dryer must not
be operated.

Machine settings

ALARM SIGNAL
permanent off
1. Turn the programme selector to any
programme.
2. Press simultaneously the LONG
ANTICREASE and ALARM buttons and
hold down for approx. 5 seconds.
3. The buzzer is by default always off. You
can use ALARM button to activate or
deactivate sound but machine does not
memorize your selection.
Water hardness
Water contains, a variable quantity of
limestone and mineral salts of which quantities
vary according to geographical locations thus
varying its conductivity values. Relevant
variations of the conductivity of the water
compared to those prefixed by the factory
Environment
The symbol
on the product or on its
packaging indicates that this product may not
be treated as household waste. Instead it
should be taken to the appropriate collection
point for the recycling of electrical and
electronic equipment. By ensuring this
product is disposed of correctly, you will help
prevent potential negative consequences for
could slightly influence the residual humidity
of the laundry at the end of the cycle. Your
dryer allows you to regulate the sensitivity of
the drying sensor based on conductivity values
of the water.
1. Turn the programme selector to any
programme.
2. Press simultaneously the ALARM and
START PAUSE buttons and hold down for
approx. 5 seconds. The current setting is
on the display:
<300 micro S/cm,
conductivity 300-600 micro S/cm,
– high conductivity >600 micro S/
cm
3. Press the START PAUSE button
sequentially until you set desired level.
4. To memorize setting press simultaneously
the ALARM and START PAUSE buttons
or turn knob to OFF position
the environment and human health, which
could otherwise be caused by inappropriate
waste handling of this product. For more
detailed information about recycling of this
product, please contact your local council,
20
– low conductivity
– medium

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents